Service Central

(253)530-3711
Login Sign up

Reset Verizon hotspot

Modified on: Fri, 11 Apr 2025 4:27 PM
Was this answer helpful?

Keywords: Verizon, HotSpot, Orbic, Cellular

Aliases:

Verizon Orbic Speed - Restore Settings to Factory Defaults

If your Orbic® Speed™ powers off on its own, crashes and resets, freezes, won't charge or runs slow, view this info.

Caution Restore Settings to Factory Defaults only if absolutely necessary as it removes all modified settings including Network Name (SSID), Wi-Fi / admin password, etc.

Via Device
Via Admin Web Interface

Via Device

Note The Master Reset button is in a small hole located on the bottom of the device, underneath the battery cover. Pressing this button returns the device to factory settings.

  1. Remove the battery cover.
    Insert your fingers into the battery removal groove at the top edge of the battery cover then lift and remove the battery cover. Set the cover aside. Battery cover removal





  1. With the device powered on, locate the Reset button.
    Reset button
  2. Press and hold the Reset button with your finger or use the tip of a pencil or pen.
    Note Hold down for approximately 5 seconds or until the display shows 'Resetting'.
  3. Replace the battery cover.
    Note Ensure the notches align then press on the cover until it clicks into place and is flat across the entire bottom surface.Replace battery cover


Top


Via Admin Web Interface

  1. Access the Admin Web Interface.
  2. From the top menu, click Settings.
    Settings
  3. From the left menu, click ManagementRebootReset.
    Reboot & Reset menu
  4. From the 'Reboot & Reset' screen, click Reset then follow the prompts.
    Reset
Was this answer helpful?