Keywords: Wifi, Bus Aliases: WiFi on buses: We currently have WiFi on several buses. Network options are: PSD-Bus-open (Slower 2.4GHZ network) and PSD-Open-Bus-5G (Fastest 5GHZ network) Actual network speeds will be limited by the bus' location and signal strength. No password is required to connect to these networks Free WiFi zones: https://psd401.net/wifi/

Keywords: Verizon, HotSpot, Orbic, Cellular Aliases: Verizon Orbic Speed - Restore Settings to Factory Defaults If your Orbic® Speed™ powers off on its own, crashes and resets, freezes, won't charge or runs slow, view this info.  Restore Settings to Factory Defaults only if absolutely necessary as it removes all modified settings including Network Name (SSID), Wi-Fi / admin password, etc. Via Device Via Admin Web Interface Via Device  The Master Reset button is in a small hole located on the bottom of the device, underneath the battery cover. Pressing this button returns the device to factory settings. Remove the battery cover. Insert your fingers into the battery removal groove at the top edge of the battery cover then lift and remove the battery cover. Set the cover aside. With the device powered on, locate the Reset button. Press and hold the Reset button with your finger or use the tip of a pencil or pen.  Hold down for approximately 5 seconds or until the display shows 'Resetting'. Replace the battery cover.  Ensure the notches align then press on the cover until it clicks into place and is flat across the entire bottom surface. Top Via Admin Web Interface Access the Admin Web Interface. From the top menu, click Settings. From the left menu, click Management > Reboot & Reset. From the 'Reboot & Reset' screen, click Reset then follow the prompts.

Keywords: psd-open, psd-closed, Mac OS, psd-auth Aliases: wireless, network, connection, internet Scope: This article covers connecting to building WiFi on MacOS Ventura or later. This also applies to older versions of MacOS, but will look slightly different. Definitions: psd-auth: WiFi network for district devices only psd-open: open WiFi network for public devices, IOT devices, and PSD Chromebooks Procedures: NOTE: District desktops and laptops should always be connected to psd-auth to ensure operability with other district devices such as printers. On the top of your screen, click on the the WiFi symbol A window should open showing visible networks Click on psd-auth if your device is an authorized district device, otherwise select psd-open

Keywords: psd-open, psd-auth, Windows, Surface laptop,  Aliases: wireless, network, connection, internet Scope: This article covers connecting to building WiFi on Windows devices including Dell Desktops Lenovo Thinkpad Laptops Microsoft Surface Laptops Definitions: psd-auth: Secure WiFi network for district devices only psd-open: Unsecure WiFi network for public devices only Procedures: NOTE: District Mac and Windows laptops should always be connected to psd-auth to ensure operability with other district devices such as printers. On the bottom right of your screen, click on the the WiFi symbol A window should show the currently visible network: Select psd-auth if the computer is an authorized district device, otherwise select psd-open Troubleshooting: If the WiFi symbol is NOT visible: The WiFi Icon is hidden and can be shown by clicking the ^ Icon   The Wifi Icon can be dragged to the bottom for easy access If Wifi Symbol shows as follows: There is a likelihood that it is connected to the network via a network cable. If network problems occur with this symbol, restart the computer.

Keywords: psd-open, psd-auth, chromebooks, security Aliases: wireless, network, connection, internet Scope: This article covers connecting to building WiFi on Chromebooks Definitions: psd-auth: Secure WiFi network for authorized district devices only psd-open: Open WiFi network for public devices only (all chromebooks will always be on open) Procedures: On the bottom right of the screen, click on the the area as shown: Click on the text below the WiFi icon (Clicking the WiFi icon will turn off or on WiFi for the device). Click on psd-open and ensure it is connected.